These custom low-profile replacement feet lower the center of gravity of large lenses and make them easier to pack.

The replacement feet have the same dual safety stops and flash bracket compatibility as our lens plates.
They are milled to slide right into an Arca-Swiss style quick-release clamp, and also have 1/4" and 3/8" tapped holes for mounting to non-quick-release tripod heads and monopods.

AP - 452

£ 77.00 inc.vat

For Nikon:
500 f/4 AF-S versions I & II
200-400 f/4 AF-S VR

Lowers the overall height of the lens by about
2" for 500 f/4, 1.25" for 200-400 f/4.
Note: This particular plate mounts so close
to the lens that it is difficult to use the plate
as a handle.

AP - 553

£ 77.00 inc.vat

For Nikon:
500 f/4 AF-S versions I & II
200-400 f/4 AF-S VR

The AP-554 replaces the stock foot on the above lenses. It is an alternative to our AP-553 plate. It has the advantage of greater clearance between the body of the lens and the foot, making it easier to use the foot as a handle for your lens. In addition, it is longer, allowing you to balance your lens properly when using light-weight camera bodies. It will allow you to balance your lens with all pro and pro-sumer Nikon camera bodies, even when using teleconverters (see chart below for details). It is the only replacement foot on the market for these lenses that allows this comprehensiveness in balancing. We used finite element analysis to design the foot with the proper balance of weight savings and stiffness. Other manufacturers have removed material to make the product lighter; however, we found that doing so reduces its rigidity below our quality standards.

Check the chart to make sure your lens
and camera combination is compatible.

AP - 554

£ 85.00 inc.vat

For Nikon:
600 f/4 AF-S version I
(version II uses AP-452)

Lowers the overall height of the lens by about 1"

AP - 652

£ 77.00 inc.vat

For Canon:
600 f/4 IS 400 f/2.8 IS

Lowers the overall height of the lens by about 1.5" for the 600 f/4
Note: This particular plate mounts so close
to the lens that it is difficult to use the plate
as a handle.

AP - 602

£ 77.00 inc.vat