|
|
Call or email us |
The Nikon mount AT-X 124 PRO DX II has a built-in AF motor drive.
The motor inside the lens was loaded onto the Nikon mount specification anew.
The AF operates smoothly and quietly due to a DC motor that uses a new AF control gear assembly. With the built-in motor, the lens can be used in AF mode with the Nikon D60 and D40 and other silent wave bodies.
The Canon version of the lens already has a built-in AF motor and will benefit from the improved multi-coating.
The optical system of original AT-X 124 PRO DX won awards for its sharpness world-wide. This design was maintained in the AT-X 124 PRO DX II and improved with the introduction of new multi-coating system. The new multi-coating helps reduce reflections that can cause flare and ghosting even more than in the AT-X 124 PRO DX.
The AT-X 124 PRO DX II features the one-touch focus clutch mechanism.
To use the one-touch focus clutch mechanism, move the focus ring forward, towards the front of the lens, for AF or back for MF. This allows for a fast and easy manual over-ride in difficult lighting situations.
Digital single-lens reflex DX lens dedicated to digital SLR cameras with APS-C sized sensors.
TECHNICAL SPECIFICATIONS |
|
 |
|
Mount Availability |
Canon & Nikon Digital Only* |
Recommended Sensor Size |
APS-C sized ( 23.7 x 15.6mm ) CCD |
Zoom Range |
12-24mm |
Maximum Aperture |
F/4 |
Minimum Aperture |
F/22 |
Optical Construction |
13 Elements / 11 Groups |
Coatings |
Multi - Layer |
Zooming System |
Rotary Type |
Minimum Focus Distance |
11.8 inches ( 30 cm ) |
Macro Ratio |
1:8 |
No. of Diaphragm Blades |
9 |
Filter Size |
77mm |
Dimensions ( Diam x Length ) |
3.46 x 3.5 in ( 84mm x 89.5mm ) |
Weight |
19.0 oz ( 540g ) |
Included Accessories |
BH-777 DStar Bayonet Hood |
Optional Accessories |
Fitted Case |
|
|
*Will not give full coverage on 35mm SLR cameras |
|
 |
|
|
|